Specialty Products for the Building Supply Industry


Waterproofing & Sealing


Sealwall - Concentrated Cementitious Waterproof Coating

Basic Use: Sealwall is a concentrated water resistant agent. When mixed with cement and water, it forms and gives protection to masonry walls of all types. Sealwall waterproofs, beautifies, insulates, and protects.

Features & Benefits:
  • Forms a monolithic bond with the porous surface thus locking out all moisture and deteriorating elements.
  • Locks itself to the surface so that it cannot chip, scale, or powder off.
  • Chemically and physically becomes an integral part of the wall surface and forms a barrier to moisture and water.
  • It can be washed and cleaned repeatedly without affecting its appearance or efficiency.
  • Because Sealwall is a concentrate, it saves the end user money.
  • Permanent shelf life and contains no cement to get stale.
  • Economical and efficient choice for waterproofing.



Black Foundation Coating - Cementitious Foundation Waterproofing Agent

Basic Use: Sealwall Black Foundating Coating is specifically designed for waterproofing exterior foundations or poured concrete, cement, or cinder block. It is a concentrated water resistant agent. When mixed with cement and water, Black Foundation Coating forms a waterproof barrier for any masonry wall.

Features & Benefits:
  • Forms a monolithic bond with the porous surface thus locking our all moisture and deteriorating elements.
  • Locks itself to the surface so that it cannot chip, scale, or powder off.
  • Chemically and physically becomes an integral part of the wall surface and forms a barrier to moisture and water.
  • It can be washed and cleaned repeatedly without affecting its appearance or efficiency.
  • Easier to mix and apply than the dry mixes, iron oxides, and petroleum-based finishes.
  • Cures to a smooth, hard, attractive finish.



Hydraulic Cement - Fast-Setting, Non-Shrink Hydraulic Cement

Basic Use: Sealwall Hydraulic Cement is a fast-setting cement compound that stops pressure water leaks in concrete and other masonry structures at once. This special cement is made in two grades: Fast-Set and Regular-Set. Fast-Set Hydraulic Cement will harden is just three minutes and Regular-Set will set in three to five minutes. Both grades have broad applications for professional use.

Features & Benefits:
  • Dry powder form makes it easy to handle, mix, and store.
  • Easy to apply.
  • Mixing and application does not require special tools.
  • Expands as it sets, locking into place.
  • Can be applied underwater.



Seal Glaze - Clear Semi-Gloss Acrylic Concrete & Masonry Sealer

Basic Use: Seal Glaze is a water-based acrylic sealer that dries to a clear, hard, semi-gloss finish. It penetrates deep and seals against water, dirt, and stains.

Features & Benefits:
  • Gives greater definition to most surfaces.
  • Retains original beauty of masonry buildings and structures.
  • Will not yellow with age.
  • Seal Glaze is self-cleaning on exterior surfaces when exposed to rainfall.
  • Permits moisture to escape from walls.
  • Reduces staining of alkaline efflorescence. 
  • Great for renewing old floors.
  • Odor-free, nonvolatile, and east to clean up.



Tuff Stuff - Clear Heavy-Duty Concrete & Masonry Sealer

Basic Use: Tuff Stuff is a heavy-duty acrylic concrete and masonry sealer. It is designed for excellent adhesion and long wear on new or old concrete. This product is intended for both interior and exterior use. Tuff Stuff dries to a crystal clear finish and will remain clear.

Features & Benefits:
  • Resists penetration from oils, unleaded gasoline, chemicals, salts, and water.
  • Wears and weathers very well.
  • Old concrete surfaces do not require etching before application to Tuff Stuff.
  • On vertical surfaces, it will seal out water and protect against degradation from airborne contaminants.
  • Tuff Stuff helps keep surfaces clean and reduces staining or alkaline efflorescence.
  • Cures to a hard, resilient finish.
  • Odor-free and non-combustible. 



Silicone - Clear Water Repellent Treatment for Concrete & Masonry
 

Basic Use: Silicone water repellent is a solution of sodium methyl siliconate compounded with a solvent or water as required. It is designed to impart water repellency to a wide variety of concrete and masonry surfaces. It dries tack-free in two to four hours and cures to an invisible water resistant resin. Low water absorption properties of Silicone are maintained for long periods of time. Two formulas are available: a 5% solids formula in a solvent solution and a 3% solids formula in a water solution.

Features & Benefits:
  • Penetrates deep into pore structure of concrete.
  • Provides a 95% rejection of water and salt.
  • Helps keep concrete from scaling and spalling.
  • Easy to apply with limited skilled labor.
  • Suitable for treating new or old concrete.
  • No effect on skid resistance of concrete surface.